Rose CrystalView Plus Manual de Instruções descarregar pdf (Página 17)

INSTALLATION

CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL

Installation

Please refer to the safety section first before proceeding with any installation

or configuration of the CrystalView Plus.

Installation of the CrystalView Plus consists of three easy steps.

1. Connect the cables to the equipment.

2. Applying power.

3. Adjust the video channels (if needed).

More advanced users can refer to Appendix E for a quick installation and

video compensation adjustment guide.

For systems that only require running Video through the CrystalView Plus

with no keyboard or mouse or use extended cable lengths between the local

unit and a computer or KVM switch, supplemental power should be supplied

to the Local Unit. The Local Unit gets its power from the keyboard port of

the CPU. Rose Electronics can supply a power transformer that connects to

the Local Unit to provide this power. This power transformer can be ordered

from Rose Electronics (P/N TFR-05D400FSUB)

When installing the CrystalView Plus, locate the Local unit as close as

possible to the CPU. Keep the CPU and KVM cables as short as possible

but still give some freedom of movement. Using shorter cables keeps the

video noise to a minimum and reduces installation costs. You can mount

the CrystalView Plus in a CPU rack with the optional rack mount kit. When

mounting in a rack, follow the instructions in Appendix C and Appendix D

and assure that the operating temperature of the Local and Remote Units do

not exceed the maximum ratings. Provide adequate air circulation to assure

that the maximum operating temperature is not exceeded.

Wherever the CrystalView Plus Local and Remote Units are located, they

should be on a secure surface and free from obstructions and objects that

may cause damage to the units.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Sem comentários

Rose CrystalView Plus Manual de Instruções Página 17